Labelmate Label Splicer RRS-8-12RRS-8-12 includes CAT-3-CHUCK-220 Winders (x2); RRS-8-16 includes CAT-3-R16-CHUCK-220 Winders (x2).
8" wide Splicing Table accepts all label widths from 0.5" to 8" (12.7 - 203-mm).
6-Digit Digital Pre-set-Counter with Auto-Stop when Pre-set Count or End-of-Roll is reached (opaque labels only).
Fully Bi-Directional operation controlled from a single Control Panel.
Stainless Steel Splicing Table has precision Knife Grooves milled at 80¨« and 90¨« to Label Path.
Two Outer Guide Flanges included to guide outer edge of Label Roll.
Splicing Tape Roll Holder included on the Splicing Table. Linear rewind speed varies with and weight.
Overall Dimensions (HWD):
RRS-8-12: 16" x 55" x 15" (406 x 1397 x 381-mm).
RRS-8-16: 16" x 63" x 15" (406 x 1600 x 381-mm).
Splicing System Weight:
RRS-8-12: 114lbs (51-kg).
RRS-8-16: 118lbs (53.5-kg).
Power Adaptor for both Splicing Systems is a universal PS-100.
3-Year Parts and Labor Limited Warranty.
|Material Type||Label Splicer|
|Maximum Roll Diameter||12"|
|Maximum Speed||304 ips|